Mounts on Most All Seed Tenders

DIRECT MOUNT

Model mounts to dispense product directly into hopper or conveyor. Can be wired direct to conveyor switch or separate 60’ wiring harness.

Direct Mount system can mount directly onto the seed tender or with mounting rails provided.

Direct mount is the most economical unit available.


AUGER MOUNT

augermount

Auger Mount is complete with hanger brackets, mounting rails & wiring system.

Special 2-way wiring powers both treater & auger.

Discharge spout directs product onto “flowing” seed.

Auger inclines & rotates to provide convenient product loading height & location.

Mounting designs keeps treater vertical for even unloading, while delivering seed treatment to any location.

The “Low RPM/High Torque” motor & gearbox, combined with the adjustable slide gate, provides the accuracy of both systems.

The agitator spike on the steel blade keeps the product moving smoothly.

Mounts directly to bulk seed wagons with the universal mounting bracket. Metering gate & blade dispense product at consistent rates to match the conveyor capacity. 1 1/4″ discharge hose places product directly onto the seed moving under the hose. The seed is mixed as the treatment & seed are moved through the conveyor, discharge spout & through the drill or planter box. Works with auger, belt conveyor or air systems.

The “Low RPM/High Torque” motor & gearbox, combined with the adjustable slide gate, provides the accuracy of both systems.

  • The agitator spike on the steel blade keeps the product moving smoothly.
  • Both Direct & Auger Mount system can mount directly onto the seed tender or with mounting rails provided (see front of brochure).
  • Direct mount is the most economical unit available.
  • Auger Mount is complete with hanger brackets, mounting rails & wiring system.
  • Special 2-way wiring powers both treater & auger.
  • Discharge spout directs product onto “flowing” seed.
DIRECT MOUNT AUGER MOUNT
DIMENSIONS 10.25” DIA. X 16.5” HEIGHT
(plus hose length)
10.25” DIA. X 24” HEIGHT
(to bottom of power unit)
AUGER SIZE **** 1.5” DIA. X 5’ LONG
(Length can be shorten)
METERING RATE 12# to 120# per Hour1 12# to 120# per Hour1
CONTAINER CAPACITY 12#1 12#1
MOTOR/GEARBOX 12Volt Low RPM/High Torque (2) 12Volt Low RPM/High Torque
POWER REQUIREMENTS .6 AMPS 1.2 AMPS
Based on 80/20 Talc/Graphite
WIRING SYSTEM OPTIONS
BOTH MODELS
FULL 60’ WIRING
Battery Clips, 3-Way Switch
(Also works with
Optional Micro-Switch)
DIRECT WIRING
Wires Direct to
Seed Tender ON/OFF Switch

1Based on 80/20 Talc/Graphite

ADJUSTABLE HEIGHT & 300 DEGREE AUGER ROTATION ALLOWS LOWER MOUNTING HEIGHT

mount